We are seeking to recruit these employees to start as soon as possible. Your application will be
forwarded to the HR department in Austria as the job will be located at the Windtec site in Klagenfurt.
We are seeking to recruit a software developer for object oriented languages. The main tasks are focused on the development of visualization systems for data collection and processing.
Your responsibilities include:
Development of visualization systems for data coming from different wind turbines
Implementation of systems for data collection, processing and evaluation
Programming of applications for data collection, processing and transfer
Preparation of interfaces (data transfer, data export, data import)
Preparation of technical documentation
Your qualifications:
Electrical Engineering / computer science training at technical school or university level
We are seeking to recruit software programmers for control system software. The main tasks are focused on programming, testing and installation of control system software.
Your responsibilities include:
Development, programming and testing of control system software
Installation of prototype control system software
Providing training on the implemented control system software for our customers
Preparation of technical documentation
Your qualifications:
Electrical engineering / computer science training at technical school or university level
We are seeking to recruit engineers for structural calculation of rotor blades for wind turbines. The main tasks of this position are including the full range of structural calculations for new blade structures as well as optimizing material specifications.
Your responsibilities include:
Dimensioning and calculation of fiber-reinforced plastics for rotor blades
Optimizing of structures by using numerical and analytical methods
Documentation of the results
Preparation of practical solutions
Test design and prototype testing
Preparation and monitoring of the connected certification processes
Your qualifications:
Mechanical or aerospace engineer at university level or similar
Experience in calculation of fiber-reinforced plastics
Knowledge in fatigue analysis of fiber-reinforced plastics
Knowledge in rotor blade production are preferred
MS windows and office applications are taken for granted
We are seeking to recruit engineers for the aerodynamic design of rotor blades for wind turbines. The main focus of this position is to work on specifications in development projects and to optimize and improve the aerodynamic behavior of rotor blades within the development process.
Your responsibilities include:
Design of rotor blades regarding aerodynamic, efficiency and loads
Selection of airfoils
Documentation of calculation results
Creating of specifications
Your qualifications:
Mechanical or aerospace engineer at university level or similar
Experience in design and calculation of rotor blades
Excellent knowledge in fluid dynamics
Knowledge in load calculation for wind turbines is an advantage
Knowledge in rotor blade production are preferred
MS windows and office applications are taken for granted
We are seeking to recruit as soon as possible designers for INVENTOR. In this position the focus is on designing mechanical components for wind energy converters. You will find an interesting field of duties in a future oriented company that acts on the global market.
Your responsibilities include:
Designing mechanical components for wind energy converters
Designing single parts as well as entire modules
Optimizing design in cooperation with the calculation team
Preparation of bills of materials
Management of the related documentation
Your qualifications:
Technical college (HTL) with focus on mechanical engineering
CAD experience in 3D – INVENTOR preferred
Experience in mechanical design
MS Windows and office applications are a basic requirement
We are seeking to recruit Electrical Engineers with practical experience for technical service tasks. You will be the link to our customer, solving technical problems within your team and pass on the lessons learned to the development department.
Your responsibilities include:
General interface between customer, development and supplier
Support within the technology transfer to the customer
Erection of prototype, assembly and commissioning on site
Continuous quality control and active identification of improvements
Customer trainings and preparation of the trainings documents
Providing and updating documentation
Valuation of change proposals from the customer or supplier regarding production planning and operations as well as the coordination of realization
Handling of complaints in technical respects
Collaboration in different project teams at company’s site and customer’s site
Your qualifications:
Minimum technical college (HTL) – Electrical Engineering
Experience in SPS is an advantage
Experience with different computer programs
Personality with good communication skills who likes to work solution oriented
Resilient in interacting with customers
Reliable and exactly working style
Team spirit and fun with having an interface position
English language skills, both written and verbal, are essential
We are seeking to recruit as soon as possible Electrical Engineers for configuration for energy and controlling cabinets in a future oriented company that deals with the development of wind energy converters on the global market.
Your responsibilities include:
Configuration of customer specific installation systems
Dimensioning of energy and controlling cabinets
Monitoring and assistance for building of prototype cabinets
Documentation of cabinets
Your qualifications:
Technical college (HTL) with focus on electrical engineering / power electronics
Basic knowledge in the fields of:
Configuration of cabinet parts
Clamp and plugging techniques
Signal and energy transmission
Control- and measurement technology
CAE knowledge EPLAN (Electric P8) preferred
MS Windows and office applications are a basic requirement
English language skills, both written and verbal are essential
Self dependent and self responsible way of working
We are seeking to recruit mechanical engineers to support our department of Mechanical Analysis. The main tasks in this position are the whole range of mechanical engineering calculations needed to design a wind energy converter.
Depending on your job specialization the responsibilities are:
Dimensioning of gears, brakes and couplings
Design of bearings and screws
Calculation of cooling and lubrication systems
Strength calculation using analytical formulas and simplified FEM-Programs
Material selection
Definition of specifications
Link between component suppliers and our design department
Your qualifications:
Mechanical engineer at university level or similar
Good basic knowledge in dimensioning of machine components
Basic knowledge in material strength analysis and statics
Knowledge in vibration analysis and dynamics are an advantage but not a must
Personality with good communication skills who likes to work solution oriented
We are seeking to recruit a dedicated strategic purchasing manager. In this position you actively support our Business Development to build up efficient Supply Chain structures and organize strategic relations with suppliers.
Your main responsibilities include:
Active creation of strategic relations with suppliers
Support in building up a Supply Chain Management for our customers
Strategic supplier development
Implementation and maintenance of benchmark documents for suppliers (warranty agreements, warranty clearing)
Execution of analysis of the buying market – global sourcing on a sellers’ market
Development and implementation of innovative strategies in Business Development on the basis of a global cooperation of customers and suppliers
Independent contract negotiations and agreement of terms
Your qualifications:
Education in economics or technology (college or similar training)
Several years of experience in strategic purchasing
Several years of experience in compilation and negotiation of contracts in English
Experienced partner in negotiations with international suppliers
Technical interest is an advantage
Systematic, goal oriented and strategic mind set
Open and team-oriented personality
Fluent English negotiating skills and willingness to travel
We are seeking to recruit an expert for gearbox developments. In this position you act directly as an interface between gearbox designer and mechanical design.
Your responsibilities include:
Conceptual design in KISSsoft and KISSsys
Validation of gearboxes of different manufacturers (evaluation of calculation and design)
Interface between gearbox designer and mechanical design
Providing of specifications
Your qualifications:
Mechanical engineer at university level or similar
Experience in gearbox design, calculation and manufacturing
Experience in drive train analysis
Good knowledge in KISSsoft and KISSsys
Personality with good communication skills who likes to work solution oriented
We are seeking to recruit Mechanical Engineers with practical experience for technical service tasks. You will be the link to our customer, solving technical problems within your team and pass on the lessons learned to the development department.
Your responsibilities include:
General interface between customer, development and supplier
Support within the technology transfer to the customer
Erection of prototype, assembly and commissioning on site
Continuous quality control and active identification of improvements
Customer trainings and preparation of the trainings documents
Providing and updating documentation
Valuation of change proposals from the customer or supplier regarding production planning and operations as well as the coordination of realization
Handling of complaints in technical respects
Collaboration in different project teams at company’s site and customer’s site
Your qualifications:
Minimum technical college (HTL) – Mechanical Engineering
Experience in mechanical design (Autodesk Inventor is an advantage)
Experience with different computer programs
Personality with good communication skills who likes to work solution oriented
Resilient in interacting with customers
Reliable and exactly working style
Team spirit and fun with having an interface position
English language skills, both written and verbal, are essential
We are seeking to recruit an expert for hydraulic systems in wind energy converters. In this position you are the driver for technological development and act directly as an interface for the design of hydraulic systems at Windtec and the component suppliers.
Your responsibilities include:
Design of the hydraulic system of a hydrostatic superposition gearbox in cooperation with component suppliers
Link between load calculation and supplier
Link between gearbox designer and supplier of hydraulic system
Link to the mechanical design department
Definition of specifications
Your qualifications:
Mechanical engineer at university level or similar
Good knowledge in hydraulic components especially hydrostatic pumps
Basic knowledge in vibration analysis and dynamics are an advantage
Basic knowledge in Matlab Simulink is an advantage
Basic knowledge in gearbox design is an advantage
Personality with good communication skills who likes to work solution oriented
We are seeking to recruit a Project Manager for leading projects developing entire wind energy converters (WECs). These projects normally run for two years and usually involve customers and suppliers across several continents.
Your responsibilities include:
Project management for an entire WEC development
Responsibility for planning the required capacities and all other project resources
Project planning and cost controlling in cooperation with the technical departments
Liaising and communicating with the customer, suppliers and in-house development employees
Your qualifications:
Technical education and in electrical or mechanical engineering
Experience in the field of WECs would be a great advantage
Several years of work experience in project management
MS Office and MS Project are a basic requirement
Willingness to travel, also outside Europe
Ability to cope with stress and good social skills are a basic requirement; personal responsibility and ability to assert yourself
Results driven and focused
Communicative and open minded personality
Good command of English, both written and verbal is essential
We are seeking to recruit a construction engineer who can start his/her job in our company as soon as possible. In this role you assume responsibility for the calculation of steel and concrete structures and for the generation of plans for carrying structures of wind turbines.
Your responsibilities include:
Construction and support with the calculation of
Concrete and steel structures
Foundation of wind turbines
Inspection and quality control of the construction work of the basements
Your qualifications:
Established engineering education (School for higher technical education, University of applied sciences, Technical University)
Experience with the construction of steel and concrete structures
Knowledge of calculating steel and concrete structures is advantageous
Knowledge of MS Windows and Office applications are required
We are seeking to recruit an experienced accountant. This position includes the controlling of accounting-processes and accounts. Additionally you are responsible for supporting our Finance Manager in the monthly reporting process.
Your responsibilities include:
Controlling of accounting-processes and accounts
Support of our Finance Manager in quarterly audits according to American standards
Internal contact person for questions regarding accounting
Contact person for certified accountant and tax consultant
Your qualifications:
Business education on college level (HAK) or higher
Several years of work experience in accounting
Certified management accountant
Knowledge in international accounting
Experience with ERP-systems
Self-dependent, exactly and reliable working style
We are seeking to recruit engineers for CFD calculation of cooling systems of wind energy converters (WECs) including supplier specifications. In addition you are responsible for the aerodynamic design of rotor blades for wind turbines.
Your responsibilities include:
Calculation and simulation of cooling systems for WECs through CFD methods
Aerodynamic design of rotor blades for WECs through CFD methods
Evaluation of the calculation results
Optimization of structures and components
Presentation of the results
Preparing supplier specifications
Your qualifications:
Mechanical engineering at university level
Experience in calculating components
Knowledge of CFD calculation (ANSYS)
Good knowledge in the area of cooling systems and aerodynamic design
English language skills, both written and verbal, are essential
For building up a new business segment in a global environment we are seeking to recruit dedicated and creative employees to arrange internal and external processes along the entire value-added chain. According to your qualifications we can offer team leading positions as well as building up the entire field of logistic.
Your responsibilities include:
Arranging internal and external processes along the entire value added chain
Responsibility for a well-regulated and controlled transport process
Contract negotiations and agreement of terms with transport companies
Analysis of the buying market
All tasks concerning the logistic procedure (customs, cargo, dangerous goods, import, export, etc.)
Your qualifications:
Education in logistic and/or business education
Several years of work experience in logistic
Experience in production procedures and global sourcing is advantageous
Understanding of processes and problem solving skills
Self-dependent working style and strong communication skills
Experience with IT systems (ERP) and MS Office
Excellent English language skills, both written and verbal
We want to strengthen and extend our IT-team due to international orientation. According to your qualifications we can offer responsible positions as well as specialist positions.
Your responsibilities include:
Leading of IT-projects in a corporate surrounding
Analysis, improvement and enhancement of the IT-system including the used ERP-system
Mentoring and improvement of engineering-applications
Customer and internal trainings
Budget and team responsibility
Documentation of internal processes and procedures
Your qualifications:
Technical education (TU, FH, HTL with focus on information technology, data processing, organization)
Several years of work experience in the IT sector as well as in Project Management
Experience with the Microsoft Server product range
Experience with applications in engineering
Knowledge about ERP-systems and database especially SQL
Leading qualities, strong communications skills and self-dependent working
Excellent English language skills, both written and verbal
